Platinum Energy Services 400,333-11th Ave SW, Calgary, Alberta, T2R 1L9

Tel.(403)264-6688 Fax.(403)237-8721

  • LinkedIn - Grey Circle

WELCOME TO PLATINUM ENERGY SERVICES

Platinum takes pride in being the premier manufacturer of steel pressurized vessels, as well as non-pressurized API tanks, serving the Canadian energy industry and beyond. Additionally, Platinum supports numerous other industries through the development and construction of specialized equipment.

Platinum provides and supports a broad array of innovative products including:

 

  • Separator packages, treaters, free water knock-outs, flare stacks, dehydrators, and line heaters.

  • Customized API Tanks from 50 bbl - 4,000 bbl;

  • LPG storage containers up to 1,000,000 U.S. gallons

  • Specialized Anhydrous Ammonia vessels serving the agricultural market;

  • Quality reconditioned equipment in all categories

ABOUT

Platinum takes pride in being the premier manufacturer of steel pressurized vessels, as well as non-pressurized API tanks, serving the Canadian energy industry and beyond. Additionally, Platinum supports numerous other industries through the development and construction of specialized equipment.

 

  • Platinum provides and supports a broad array of innovative products including:​Separator packages, treaters, free water knock-outs, flare stacks, dehydrators, and line heaters;

  • Customized API Tanks from 50 bbl - 4,000 bbl;

  • LPG storage containers (bullets) up to 1,000,000 US Gallons;

  • Specialized Anhydrous Ammonia vessels serving the agricultural market;

  • Quality reconditioned equipment in all categories.

 

Health and Safety

Platinum Energy Services holds the provincial Certificate of Recognition (COR) which is the primary Alberta safety certification. We have three full time personnel to administer our comprehensive safety programs in our Calgary and Redcliff facilities.

Our employees receive training in:

  • Confined space

  • Fall Protection

  • WHMIS (work place hazardous materials identification system)

  • TDG (transport of dangerous goods)

  • H2S Alive

  • Forklift Operator Training

  • Overhead Crane Training

Safety Associations:

  • Comply Works

  • IS Net World

  • COR

Industry Affiliations

  • ASME - American Society of Mechanical Engineers

  • NB – National Board of Boiler and Pressure Vessel Inspectors

  • ABSA – Alberta Boiler Safety Association

  • CWB - Canadian Welding Bureau

  • Approved Quality Programs – AQP1084, AQP1316, AOQP7003

  • Transport Canada B620-14 Certificate #Calgary 25-1254 #Redcliff 25-1271

  • APVMA - Alberta Pressure Vessel Manufacturing Association

  • Manufactures Health and Safety Association – through WCB (workers compensation board)

  • Canadian Compressed Gas Association

  • CPA - Canadian Propane Association

Our Team
Joe Ladouceur
President & CEO

Joe Ladouceur has over 25 years' experience in the oil & gas industry, starting with energy finance at the Royal Bank of Canada and leading into various executive positions with several Canadian energy companies including: E&P, energy services and manufacturing. Joe's extensive experience and education well position him to lead Platinum into its next phase of growth, prosperity, and industry leadership.

Joe has an Honors Business Administration degree from the Ivey School of Business at the University of Western Ontario (London), an MBA from KU Leuven (Belgium) and an Honourary Fellowship from St. Mary's University (Calgary).

Bob Schulze
Vice President Operations

With over 30 years experience in the Canadian oil & gas business, Bob Schulze has considerable experience in production equipment design, operations, maintenance and fabrication. Bob began his career with Suncor in operations, maintenance and construction. He then attained his Journeyman certificate in Instrumentation and has worked his way through the industry to his current executive position at Platinum, where he carries full responsibility for product design, engineering, estimating and fabrication. Bob has been with Platinum since its exception nearly 25 years ago.

Ryan Mailer
Vice President Sales

Ryan Mailer has been in sales at Platinum for approximately 20 years where he has crafted a reputation as the most knowledgeable and connected sales professional in the fabrication industry. With an additional five years of direct fabrication and field operations experience, Ryan utilizes his extensive industry knowledge to direct the sales and marketing efforts of Platinum in Canada, as well as abroad. 

 

SERVICES

Structural Welding

Platinum's CWB certified shops can provide quality custom structural fabrication to suit your needs.

Internal and External Tank Vessell Coatings

Internal and External Tank Vessel Coatings qualified and knowledgeable staff have many years of experience using multiple product lines to provide the best option for your application. Contact us for more information.

Pressure Piping

Platinum's ASME certified shops can provide custom pressure piping to suit all your requirments

Industrial Blast and Paint

Platinum can provide industrial blast and painting services to suit your needs. We currently provide this service in the following industries. Oil and Gas, Agriculture, Construction, and the Trucking industry.

New and Used Surplus Equipment

Platinum has an extensive list of new and used surplus equipment. We can assess to help fill your requirements. Contact us for more information.

Foam Insulation

Platinum can supply superior insulation for all your building, skid tank, and vessel insulation requirements. Contact us for more information.

 
 
Reconditioning and Repair Services

Platinum can provide all the services necessary to recondition/repair equipment. We can help you get your equipment back to use in a quick and economical way. Let us help you re-purpose your stranded assets. Contact us for more information.

PRODUCTS

LNG to NGL Storage Bullets

Registered Designs in AB, SK, BC. Units can be registered in any other province or US state.

  • For Storage of NGL's (propane, butane plus)

  • Sizes 5,000-120,000 US Gallon (18,927-567,812 ltr)

  • Pressure 250 psi (1,724 kpa)

  • Sweet or sour service

  • Custom design capabilities

  • See our available inventory

Free Water Knock Outs (FWKO)

Free Water Knock Out - Heated and or cold, conventional design. Registered designs in AB, SK, BC. Can be registered in any other province or US State.

  • Sizes 72" X 20' 75 psi (1,829 mm x 6096 mm 517 kpa) horizontal sweet and sour treater 1.0mmbtu/hr 

  • Sizes 96" X 30' 75psi (2,438mm x 9,144mm 517kpa) horizontal sweet and sour treater / free Water Knock out 1.9mmbtu/hr 

  • Sizes 96" X 30' 100psi (2,438mm x 9,144mm 689kpa) horizontal sweet and sour treater / free Water Knock out 2.5mmbtu/hr 

  • Sizes 120" X 40' 75psi (2,438mm x 9,144mm 517kpa) horizontal sweet and sour treater / free Water Knock out 2.5-5.0mmbtu/hr

  • Custom design capabilities

  • See our available inventory

Dehydrators

Dehydrators-Integral Natural Gas Glycol Dehydration packages registered designs in AB, SK, BC. Units can be registered in any other province or US state.

  • Registered sizes 36”  - 144” (882 – 3,528mm) Diameter and length from 5’ – 40’ (1,470mm – 11,760mm)

  • Pressure  - 50-100psi (344-689kpa)   

  • Optional internal coating available

  • Optional external insulation available

  • Sweet and sour design

  • Non registered sizes 30” – 72” (735 – 1,764mm) Diameter and lengths from 5’ – 20’ (1,470mm – 5,880mm)

  • Non registered options same as registered

  • Custom design capabilities

  • See our available inventory

 

Gas Sweeteners

Natural Gas Hydrogen Sulfide Sweeteners for Liquid chemical H2S Scavenger. Registered designs in AB, SK, BC. Units can be registered in any other province or US state.

  • Sizes 16" - 144" (406-3,658mm) x 20' (6,096mm) high vertical contactor

  • Pressure 125psi - 1,440psi (862-99,285kpa)

  • Optional pre and post separator available

  • Optional Sweetener / heated tank combination packages (Tank to hold fresh and spent liquid chemical H2S scavenger)

  • Optional L-skid type design for easy load / unload and start up

  • Custom design capabilities 

  • See our available inventory

Separators

Separators (vertical and horizontal) Registered stock designs in AB, SK, BC. Can be registered in any other province or US State.

  • 8”  -  144” Diameter (203mm – 3,658mm)

  • 3'-60' long (914mm - 18, 288mm)

  • 50psi  - 2,220psi (344 – 15,306kpa)

  • 2 and 3 phase design

  • Vertical and Horizontal

  • Separator Tank combos

  • Separator Line heater combo units

  • Separator Blow case combo units  

  • Designs that include Gas Domes or Water boots

  • Specialty internals can be provided 

  • Optional internal coating available

  • Custom design capabilities

  • See our available inventory

Line Heaters

Line Heater / Facility Heater

  • 250,000 - 10,000,000btu /hr indirect line heater 150ansi to 2500ansi coils

  • Optional burner management system (BMS)

  • Custom design capabilities 

  • See our available inventory

Separator (tank/line heater/group/test header) Combo
  • 8” - 144” Diameter (203mm – 3,658mm)

  • 3'-60' long (882mm - 17,640mm)

  • 50psi - 2,220psi (344 – 15,306kpa)

  • 2 and 3 phase design

  • Vertical and Horizontal

  • Separator Tank combos

  • Separator Line heater combo units

  • Separator Blow case combo units

  • Designs that include Gas Domes or Water boots

  • Specialty internals can be provided

  • Optional internal coating available

  • Custom design capabilities

  • See our available inventory

Vapor Tight Tanks

Dehydrators-Integral Natural Gas Glycol Dehydration packages registered designs in AB, SK, BC. Units can be registered in any other province or US state.

  • Registered sizes 36”  - 144” (882 – 3,528mm) Diameter and length from 5’ – 40’ (1,470mm – 11,760mm)

  • Pressure  - 50-100psi (344-689)

 

Flare Knock Out

Flare Knock Out Package- Registered Pressure Vessel designs in AB, SK, BC. Units can be registered in any other province or US state or non registered.

  • Registered sizes 36"-144" (914 - 3658 mm) Diameter and length from 5'-40' (1,524 - 12,192 mm)

  • Pressure 50-100 psi (344-689 kpa)

  • Optional internal coating available

  • Optional external insulation available.

  • Sweet and sour design

  • Non Registered sizes 30"-72" (762 - 1829 mm) Diameter and lengths from 5'-20' (1,524 - 12,192 mm)

  • Non registered options same as registered

  • Custom design capabilities

  • See our available inventory

Treaters

Heater Treater Conventional Design. Registered Designs

  • Heater Treater / Heated and cold Free Water Knock Out Conventional Design. Registered Designs in AB, SK, BC. Can be registered in any other province or US State

  • Sizes 72” x 20’ 75psi (1,829mm x 6,096mm 517kpa) horizontal sweet and sour Treater 1.0mmbtu/hr

  • Sizes 96” x 30’ 75psi (2,438mm x 9,144mm 517kpa) horizontal Sweet and sour Treater / Free Water Knock Out 1.9mmbtu/hr

  • Sizes 96” x 30’ 100psi (2,438mm - 9,144mm 689kpa) horizontal Sweet and sour Treater / Free Water Knock Out 2.5mmbtu/hr 

  • Sizes 120” x 40’ 75psi (2,438mm x 9,144mm 517kpa) horizontal Sweet and sour treater / Free Water Knock Out 2.5 – 5.0mmbtu/hr (3,048mm - 12,192mm)

Vessels

Pressure Vessels- Registered stock designs in AB, SK, BC. Can be registered in any province or US state

  • Vertical & Horizontal Seperators

  • Scrubbers

  • Filters

  • Blow Case

  • Condensate Conditioner

  • Horizontal Flare Knock Outs

  • Dehydration and Sweetener Contractors

  • Horizontal Treaters & Free Water knockouts

  • Horizontal Skimmers

  • NGl/NH3 storage vessels

  • Slug Catchers

  • Vapour Tight Liquid Storage

Tanks

Tanks - 12 F and API Storage tanks

  • 10bbl - 3,500bbl Single wall 12F and API 650 tanks

  • 30bbl - 1,000bbl Double wall 12F

  • Internal coating available

  • External insulation is available

  • Optional EPRV's

  • Optional fire tubes and heat coils

  • Optional skimmers available

  • Optional internals available

  • Custom design capabilities

  • See our available inventory

Anhydrous Ammonia storage tanks and Anhydrous ammonia Nurse tanks
  • NH3 (anhydrous ammonium) High Nitrogen fertilizer

  • NH3 Nurse tanks are used in the Agriculture industry as a supply / holding tank for injection of anhydrous ammonia fertilizer during spring and fall planting

  • Sizes range from 2,000 USG to 3,000 USG

 

FACILITIES

Head Office

Our main office is conveniently located in the heart of downtown Calgary. All sales inquiries, business development and business services are done at this location

Address:

400, 333-11 Ave Sw 

Calgary, Alberta 

T2R 1L9

Tel. (403)264-6688
Toll Free 1-888-745-4647

Careers – platinumcareers@platnrg.com

Sales - platinumsales@platnrg.com

Accounting – platinumap@platnrg.com

General Inquiries - platinumenergybusiness@platnrg.com

Calgary Facility: ASME Pressure Vessel Manufacturing

Our South facility is located next to the ring road in south east Calgary for easy access. Our facility is qualified to fabricate any size of pressure vessel and process piping / process equipment required, ASME Sect VIII Div 1 and CWB certificates.

Address:
7550 114 Ave SE Calgary, AB T2C 4T3

Ph. (403) 236-0530 Fax. (403) 532-2805

General Inquiries -platinumenergybusiness@platnrg.com

Redcliff Facility: ASME Pressure Vessel & API Tank Manufacturing

Our Redcliff facility is qualified to fabricate any size of pressure vessel and process piping / process equipment required under ASME Section VIII Div 1. This facility's manufacturing capacity also includes the entire realm of API storage tanks from 27-4,000 bbl, mud tanks, shale bins, flock tanks, custom projects and is CWB certified.



Address:
502 Mitchell Street North, Redcliff, AB T0J 2P0

Ph. (403) 548-2657 Fax. (403) 548-2659

Toll Free 1-888-745-4647

General Inquiries -platinumenergybusiness@platnrg.com

CAREERS

Platinum Energy Services Ltd. is a Canadian leader in the oilfield equipment supply business based in Calgary, Alberta.

To apply for any of the open positions, please send your application to platinumcareers@platnrg.com with the job title in the subject line of your email.

B-Pressure Welder - Currently not hiring for this position

Welding of pressure vessels & pressure piping.

  • Full-time

  • Hourly

  • Day and late afternoon shift

  • Wages and benefits commensurate with experience

Journeyman/Apprentice Welders - Currently not hiring for this position

Structural skid & support welding.

  • Full-time

  • Hourly

  • Day and late afternoon shift

  • Wages and benefits commensurate with experience.

Labourer - Currently not hiring for this position
  • Full-time

  • Entry level position

  • Basic hand tool skills required

  • Forklift certification required

CONTACT US

Thank you for your interest in Platinum Energy Services.

Head Office

400, 333 - 11th Ave SW Calgary, AB T2R 1L9

ph. (403) 264-6688 Toll Free 1-888-745-4647

Calgary Fabrication Facility

7550 - 114th Ave SE Calgary, AB T2C 4T3

ph. (403) 236-0530

Redcliff Fabrication Facility

502 Mitchell Street North, Redcliff, AB T0J 2P0

ph. (403) 548-2659

Whistleblower Contact

David McGoey - Matco Capital

Email: dmcgoey@matcocap.com

Hotline: (403) 294-6497